Uniline Safety Systems

Ladder Safety Equipment - Energy absorber and top anchors (patent pending)

EasyClimber’s patented energy absorbing system is a significant advancement in the fall protection industry, providing consistent and reliable energy absorption for multiple workers.

The system utilises a friction break assembly to maintain a force of less than 3kN on both the structure and the worker in the event of a fall, reducing risk of structural failure and user trauma.

The number of workers permitted to climb on the system can be increased and the system can be adapted to accommodate heavier workers if necessary. As standard, fall energy can be reliably and repeatedly controlled for 2 workers weighing up to 150kg each, often the case when a worker is carrying equipment. Four workers can be accommodated, and system loads increase to 5kN.

Following a fall, the energy absorber can be reset on site and used again.

Attachment brackets enable it to fit to round or square rungs on a variety of structures. It is housed in a tough composite casing, protecting the internal mechanism from environmental conditions.

Ladder Safety Equipment - Intermediate Brackets

Intermediate brackets are designed to position the cable away from the structure and prevent adverse wind chatter and cable oscillations in systems attached to tall structures.

They can also be used to limit cable deflection in confined climbing spaces, where deflections may cause dangerous collisions in the event of a fall.

The brackets are manufactured from 316 stainless steel and are suitably isolated from the ladder in order to prevent corrosion of the structure.

Ladder Safety Equipment - Tensioning Units

The tensioning unit provides an important visual indication that the system is correctly set for use and identifies that the system may have been subjected to a fall or impact load. A system pre-tension of 1.2kn is applied when installed, ensuring the Monkey® travels beautifully along the system.

An extension bracket is available to enable safe access and egress from ladders at the eaves of a roof.

Ladder Safety Equipment - Extension Bracket

The EasyClimber ladder extension bracket ensures that workers climbing ladders to access roofs and other platforms for maintenance and inspection tasks can mount and demount the ladder in complete safety.

The bracket, which has been designed for maximum ease of installation, clamps to a wide range of existing ladder styles and allows the EasyClimber vertical climbing system to extend 1.3m above the working platform. The bracket has an additional attachment eye so that workers can attach an alternative lanyard during transfer, ensuring they are always secured to a certified anchor point.

Often the most dangerous part of access is to and from a platform when using a fixed ladder. Having a stable extension bracket combined with an anchor point at the top to assist getting on and off the ladder safely is of great benefit to the user and significantly reduces the risk of a fall occurring.

Monkey - Uniline Technology

Find out more about the The Monkey^® attachment device