The fall protection roof anchors are easily fitted from the top of the roof structure using aluminium clamps which do not penetrate the roof sheet. The number and size of clamps have been calculated to counter the overturning moment applied by the roof anchor in the first stage of activation and resist the shear load in the second stage of activation when the energy absorber deploys.

Clamps are available to suit a range of different standing seam roof profiles. All offer non-penetrative fixing solutions.

Fall protection roof anchors can only be installed on roof systems that have been validated as capable of supporting the distributed loads applied in the event of a fall. Capital offer alternative solutions for roofs which are not suitable for fall protection roof anchors.

This predictable distributed load can be used to validate the roof systems suitability for use as a structural anchor and is always less than 0.5kNm.

The fall protection roof anchors are used for integrating Capital’s RoofSafe Cable fall protection systems into your building, thereby facilitating safe access.

The roof anchors are used for integrating Capital’s Roofsafe Cable fall protection systems into your building, thereby facilitating safe access. The anchors are modular in design and facilitate the installation of End Anchors , Corner Anchors , Variable Anchors  and Intermediate Anchors  to support the installation and use of a  a continuous handsfree Roofsafe horizontal lifeline system.  Anchors may also be used as a single point anchor for 1 person or 2 persons.  (EN795 Class A2) For further information, please contact Capital’s Technical Department.

RoofSafe Fall Protection Roof Anchors for Standing Seam Roof Systems are tested to exceed the standards of EN795, are CE marked and come with a 25 year guarantee for performance and corrosion resistance. (Subject to terms and conditions).